43EPDStandards and frameworks

Environmental product declaration (EPD)

An environmental product declaration is an independently verified document that reports a product's environmental impacts across its life cycle, based on a life cycle assessment and set rules.

Also called: EPD, Type III environmental declaration, product environmental declaration

Raw materialsLand, forests, mines, crops
SuppliersWhat a company buys
CompanyIts own operations and reporting
CustomersWhat it sells and how it is used
End of lifeDisposal, recycling, removals
Capital · banks and investors funding the chain

What it means for reporting teams

An EPD turns a life cycle assessment into a standard, comparable format. It follows product category rules (PCR) that fix the method, the system boundary and the indicators, so products in the same category are measured the same way. An independent verifier checks it before a programme operator publishes it.

EPDs are most common in construction, where architects and contractors use them to measure embodied carbon. Manufacturers need plant-level data on energy, materials, transport and waste for the period covered, plus supplier data for key inputs. An EPD is usually valid for five years, after which it is renewed or updated.

For buyers, an EPD gives product-specific emissions that can replace average factors in Scope 3 purchased goods. LCA and EPD software helps manufacturers model products, generate EPDs for product ranges and export the results in digital formats that building tools and carbon accounting software can read.

Standards involved

Rule or bodyWho it coversWhat it asks for
ISO 14025Any product sectorPrinciples and procedures for Type III environmental declarations, including independent verification.
EN 15804Construction products in Europe and beyondCore product category rules and life cycle modules for construction EPDs.
ISO 21930Construction productsInternational core rules for construction product EPDs.
Product category rulesEach product groupThe method, boundary and indicators that EPDs in that category must use.

How an EPD is produced

Pick the PCRChoose the product category rules that apply to the product.
Run the LCACollect plant and supplier data and model impacts, at least for raw material supply, transport and manufacturing.
VerifyAn independent verifier checks the data, method and report.
Publish and renewA programme operator registers the EPD, typically valid for five years.
Back to the ESG Glossary Table