72CO2eEmissions and carbon

Carbon dioxide equivalent (CO2e)

Carbon dioxide equivalent (CO2e) is a common unit that expresses different greenhouse gases as the amount of CO2 that would cause the same warming over a set period, usually 100 years.

Also called: CO2eq, CO2-eq, carbon equivalent, tCO2e

Raw materialsLand, forests, mines, crops
SuppliersWhat a company buys
CompanyIts own operations and reporting
CustomersWhat it sells and how it is used
End of lifeDisposal, recycling, removals
Capital · banks and investors funding the chain

What it means for reporting teams

Companies emit more than one greenhouse gas. The GHG Protocol covers seven: carbon dioxide, methane, nitrous oxide, hydrofluorocarbons, perfluorocarbons, sulphur hexafluoride and nitrogen trifluoride. To report one total, each gas is multiplied by its global warming potential (GWP) and the results are added up in tonnes of CO2e. Every Scope 1, 2 and 3 figure in a sustainability report is stated this way.

The GWP values come from IPCC assessment reports and are updated over time. In the GHG Protocol's table based on the IPCC Sixth Assessment Report, fossil methane has a 100-year GWP of 29.8 and nitrous oxide 273. Reporting teams must state which set of values they used and apply it consistently, because switching values changes totals and can trigger a base year recalculation.

Most emission factor databases already publish factors in kg CO2e per unit, so the conversion often happens inside the factor. Carbon accounting software stores the GWP set used for each factor, which matters when a company has refrigerant leaks or process emissions that need gas-by-gas calculation, and when auditors ask how a figure was built.

Where the values come from

Rule or bodyWho it coversWhat it asks for
IPCC assessment reportsScientific basisPublish global warming potentials for each greenhouse gas over 20 and 100 years.
GHG ProtocolCompanies using its standardsCovers seven greenhouse gases and publishes a GWP table, updated in August 2024 with Sixth Assessment Report values.
IFRS S2Companies in adopting jurisdictionsEmissions disclosed as an aggregate in metric tonnes of CO2e.

How it is calculated

Measure each gasWork out tonnes of each greenhouse gas emitted, for example from fuel use or refrigerant top-ups.
Multiply by GWPMultiply each gas by its 100-year global warming potential.
Add upSum the results to give one total in tonnes of CO2e.
Back to the ESG Glossary Table